SpectrumWiki

Radio spectrum allocations

Look up a frequency or a range.

Examples: 88.5 MHz, 1350–1430 MHz, 2.4 GHz

2.159999999 GHz (2,159,999,999 Hz)

U.S. Federal Government Allocations

2120 – 2200 MHz

Footnotes

  • 5.388   The frequency bands 1 885-2 025 MHz and 2 110-2 200 MHz are intended for use, on a worldwide basis, by administrations wishing to implement International Mobile Telecommunications (IMT). Such use does not preclude the use of these frequency bands by other services to which they are allocated. The frequency bands should be made available for IMT in accordance with Resolution 212 (Rev.WRC 15)* (see also Resolution 223 (Rev.WRC 15)*). (WRC 15)

  • 5.388A   In Regions 1 and 3, the bands 1 885-1 980 MHz, 2 010-2 025 MHz and 2 110-2 170 MHz and, in Region 2, the bands 1 885-1 980 MHz and 2 110-2 160 MHz may be used by high altitude platform stations as base stations to provide International Mobile Telecommunications (IMT), in accordance with Resolution 221 (Rev.WRC 07). Their use by IMT applications using high altitude platform stations as base stations does not preclude the use of these bands by any station in the services to which they are allocated and does not establish priority in the Radio Regulations. (WRC-12)

  • 5.388B   In Algeria, Saudi Arabia, Bahrain, Benin, Burkina Faso, Cameroon, Comoros, Côte d’Ivoire, China, Cuba, Djibouti, Egypt, United Arab Emirates, Eritrea, Ethiopia, Gabon, Ghana, India, Iran (Islamic Republic of), Israel, Jordan, Kenya, Kuwait, Lebanon, Libya, Mali, Morocco, Mauritania, Nigeria, Oman, Uganda, Pakistan, Qatar, the Syrian Arab Republic, Senegal, Singapore, Sudan, South Sudan, Tanzania, Chad, Togo, Tunisia, Yemen, Zambia and Zimbabwe, for the purpose of protecting fixed and mobile services, including IMT mobile stations, in their territories from co channel interference, a high altitude platform station (HAPS) operating as an IMT base station in neighbouring countries, in the frequency bands referred to in No. 5.388A, shall not exceed a co-channel power flux-density of −127 dB(W/(m2 · MHz)) at the Earth’s surface outside a country’s borders unless explicit agreement of the affected administration is provided at the time of the notification of HAPS. (WRC 19)

  • NG41  In the band 2120-2180 MHz, the following provisions shall apply to grandfathered stations in the fixed service:

      (a) In the sub-band 2160-2162 MHz, authorizations in the Broadband Radio Service (BRS) applied for after January 16, 1992 shall be granted on a secondary basis to Advanced Wireless Services (AWS). In the band 2150-2162 MHz, all other BRS stations shall operate on a primary basis until December 9, 2021, and may continue to operate on a secondary basis thereafter, unless said facility is relocated in accordance with 47 CFR 27.1250 through 27.1255.

      (b) In the sub-band 2160-2180 MHz, fixed stations authorized pursuant to 47 CFR part 101 may continue to operate on a secondary basis to AWS.

Wiki entries

European Union 3G & 4G (LTE) Band

Current Use
2110–2170 MHz European Union 3G & 4G band
In November, 2012, the European Commission adopted new rules clearing the way for the frequency band 1920-1980 MHz, paired with 2110-2170 MHz, to be used for 4G (LTE) services, in addition to its existing designated use for 3G services.

High Altitude Platform Station (HAPS)

Current Use
2110–2160 MHz HAPS service links for IMT in Regions 1, 2, & 3 (per 5.388A)
The ITU has identified various bands for use by High Altitude Platform Stations (HAPS), which are defined as "a station located on an object at an altitude of 20 to 50 km and at a specified, nominal, fixed point relative to the Earth."

One set of bands (47.2-47.5 and 47.9-48.2 GHz) is identified on a worldwide basis. The others apply regionally or in a subset of countries.

Although there was a flurry of activity related to HAPS beginning in the late 1990's, no HAPS systems were ever developed. As of 2015, there is renewed interest in HAPS for applications involving telecommunications from Unmanned Aerial Systems (UAS).

HAPS is declared as an application of the fixed service.

Standard LTE Bands

Current Use
2110–2170 MHz LTE band 10 FDD downlink 2110–2170 MHz LTE band 1 FDD downlink
The following bands have been defined by 3GPP as standard LTE bands for Frequency Division Duplex (FDD, where mobile and base stations transmit in separate bands) and Time Division Duplex (TDD, where mobiles and bases transmit and receive on the same frequency). These bands are defined in 3GPP TS 36.101 (link below).

Note that bands 15 & 16 and 30-32 are not defined, and the FDD band 29 is used for downlink-only for carrier aggregation, so it has no corresponding uplink band.

Uplinks refer to the frequencies used for handsets and other user devices to transmit to the base station, and downlinks refer to frequencies used by base stations to transmit to the user devices.

AWS-3

Current Use
2155–2180 MHz AWS-3 base transmit
According to the FCC:

AWS-3: Following a Notice of Proposed Rulemaking in July 2013, the Commission adopted a Report and Order in March 2014 as part of an effort to implement the Middle Class Tax Relief and Job Creation Act of 2012 (Spectrum Act) with allocation, technical, and licensing rules for commercial use of the 1695-1710 MHz, 1755-1780 MHz and 2155-2180 MHz bands. These spectrum bands are collectively known as AWS-3. The AWS-3 Report and Order required that commercial operators successfully coordinate with Federal incumbents before operating in certain Protection Zones. In July 2014, the FCC and NTIA issued a Joint Public Notice Announcing AWS-3 Coordination Details, which refined the default nationwide coordination zones and provided additional information regarding coordination between Federal and non-Federal commercial shared use of the 1695-1710 MHz and 1755-1780 MHz bands. NTIA provides information on Federal transition plans and transition data for the AWS-3 bands.