U.S. Non-Federal-Government Allocations
FIXED US22
FCC rule parts
SpectrumWiki
Radio spectrum allocations
Look up a frequency or a range.
Examples: 88.5 MHz, 1350–1430 MHz, 2.4 GHz
5.059999 MHz (5,059,999 Hz)
U.S. Federal Government Allocations
FIXED US22
ITU Region 1 Allocations
FIXED
BROADCASTING 5.113
ITU Region 2 Allocations
FIXED
BROADCASTING 5.113
ITU Region 3 Allocations
FIXED
BROADCASTING 5.113
Footnotes
- 5.113
-
US22 The following provisions shall apply to non-Federal use of 68 carrier frequencies in the range 2-8 MHz, which are not coordinated with NTIA:
(a) The frequencies authorized pursuant to 47 CFR 90.264 (Disaster Communications) and 47 CFR 90.266 (Long Distance Communications) are listed in columns 1-2 and columns 3-5, respectively. All stations are restricted to emission designator 2K80J3E, upper sideband transmissions, a maximum transmitter output power of 1 kW PEP, and to the class of station(s) listed in the column heading (i.e., fixed (FX) for all frequencies; base and mobile (FB and ML) for the frequencies in column 1 and 3; itinerant FX for the frequencies in columns 4-5).
(b) Use, Geographic, and Time Restrictions. Letter(s) to the right of a frequency indicate that the frequency is available only for the following purpose(s):
– A or I: Alternate channel or Interstate coordination.
– C, E, M, or W: For stations located in the Conterminous U.S., East of 108° West Longitude (WL), West of the Mississippi River, or West of 90° WL.
– D or N: From two hours after local sunrise until two hours before local sunset (i.e., Day only operations) or from two hours prior to local sunset until two hours after local sunrise (i.e., Night only operations).
Preferred Carrier Frequencies (kHz) Disaster Communications Long Distance Communications FX, FB, ML FX FX, FB, ML FX (including itinerant) 2326…I
2411
2414
2419
2422
2439
2463
2466
2471
2474
2487
2511
2535
2569
2587
2801
2804…A
28125135…A
5140…A, I
5192…I
5195…I
7477…A
7480…A
7802…D
7805…I
7932
7935…C, D2289
2292
2395
2398
3170
4538.6…N
4548.6…N
4575
4610.5
4613.5
4634.5
4637.5
46475046.6…E
5052.6…E
5055.6…E
5061.6…W
5067.6
5074.6…E
5099.1
5102.1
5313.6
6800.1…N
6803.1
6806.1…W
6855.1…N, M
6858.1…N
6861.1…W
6885.1…N
6888.1…N7480.1
7483.1
7486.1…E
7549.1…D
7552.1
7555.1…W
7558.1…W
7559.1…W
7562.1…W
7697.1 -
US340 The band 2-30 MHz is available on a non-interference basis to Federal and non-Federal maritime and aeronautical stations for the purposes of measuring the quality of reception on radio channels. See 47 CFR 87.149 for the list of protected frequencies and bands within this frequency range. Actual communications shall be limited to those frequencies specifically allocated to the maritime mobile and aeronautical mobile services.
Wiki entries
Access Broadband over Power Line (Access BPL)
Current Use
4.7–5.45 MHz Access BPL
According to the FCC's definition, Access BPL is "a carrier current system installed and operated on an electric utility service as an unintentional radiator that sends radio frequency energy on frequencies between 1.705 MHz and 80 MHz over medium voltage lines or over low voltage lines to provide broadband communications and is located on the supply side of the utility service’s points of interconnection with customer premises. Access BPL does not include power line carrier systems as defined in § 15.3(t) or In-House BPL as defined in § 15.3(gg)."
Low voltage lines are defined as lines carrying, for example, 240/120 volts from a distribution transformer to a customer's premises. Medium voltage lines carry between 1,000 and 40,000 volts from a power substation to neighborhoods, and may be overhead or underground.
Access BPL is an unlicensed service operated under Subpart G of Part 15 of the FCC's rules. Radiated emission limits from medium voltage lines in the 1.705-30 MHz range must not exceed the limits in 47 CFR 15.209, and those from 30-80 MHz must not exceed the limits in 15.109(b). Systems that operate on low voltage lines must comply with 15.109(a) limits across the entire 1.705-80 MHz range.
When Access BPL systems must use notch filters to protect licensed services, the notch must be at least 25 dB below applicable Part 15 limits in the 1.705-30 MHz band, and at least 10 dB below the limits in the 30-80 MHz band.
There are 12 sub-bands in which Access BPL systems are not allowed to operate anywhere to protect aeronautical (land) stations and aircraft receivers. Those excluded bands are listed in 15.615(f), and are excluded in the list of Access BPL bands in this entry.
Access BPL systems are not allowed to operate within the sub-band 2173.5-2190.5 kHz within 1 km of coast station facilities listed in 47 CFR 15.615(f)(2)(i), to protect the internationally-recognized standard maritime calling frequency of 2182 kHz.
No Access BPL emissions are allowed in the 73.0-74.6 MHz radio astronomy band on overhead medium voltage lines within 65 km of the Very Large Array radio telescope in New Mexico (34 04 43.5N, 107 37 03.82W), or within 47 km of the VLA on underground power lines or overhead low voltage lines.
Access BPL operators must consult at least 30 days in advance when deploying systems near various FCC field offices, aeronautical and maritime stations, radar systems, radio astronomy stations, and research areas. Details are in 47 CFR 15.615(f)(3).
Low voltage lines are defined as lines carrying, for example, 240/120 volts from a distribution transformer to a customer's premises. Medium voltage lines carry between 1,000 and 40,000 volts from a power substation to neighborhoods, and may be overhead or underground.
Access BPL is an unlicensed service operated under Subpart G of Part 15 of the FCC's rules. Radiated emission limits from medium voltage lines in the 1.705-30 MHz range must not exceed the limits in 47 CFR 15.209, and those from 30-80 MHz must not exceed the limits in 15.109(b). Systems that operate on low voltage lines must comply with 15.109(a) limits across the entire 1.705-80 MHz range.
When Access BPL systems must use notch filters to protect licensed services, the notch must be at least 25 dB below applicable Part 15 limits in the 1.705-30 MHz band, and at least 10 dB below the limits in the 30-80 MHz band.
There are 12 sub-bands in which Access BPL systems are not allowed to operate anywhere to protect aeronautical (land) stations and aircraft receivers. Those excluded bands are listed in 15.615(f), and are excluded in the list of Access BPL bands in this entry.
Access BPL systems are not allowed to operate within the sub-band 2173.5-2190.5 kHz within 1 km of coast station facilities listed in 47 CFR 15.615(f)(2)(i), to protect the internationally-recognized standard maritime calling frequency of 2182 kHz.
No Access BPL emissions are allowed in the 73.0-74.6 MHz radio astronomy band on overhead medium voltage lines within 65 km of the Very Large Array radio telescope in New Mexico (34 04 43.5N, 107 37 03.82W), or within 47 km of the VLA on underground power lines or overhead low voltage lines.
Access BPL operators must consult at least 30 days in advance when deploying systems near various FCC field offices, aeronautical and maritime stations, radar systems, radio astronomy stations, and research areas. Details are in 47 CFR 15.615(f)(3).
Shortwave Broadcasting
Current Use
4.75–5.06 MHz 60 m band
Various bands throughout the HF (and, technically, the MF) spectrum are used for what is commonly referred to as shortwave broadcasting. Most broadcasts use AM modulation, which can be received on inexpensive shortwave receivers. Within these bands, shortwave broadcasters use channels spaced every 5 kHz. Different broadcasters may use the same channel at different times, and schedules of shortwave broadcasts (which are coordinated through the International Telecommunication Union) change on a regular basis. Most shortwave broadcasts also use very high power, as much as 500,000 W, using very large antenna arrays.
Because many broadcasts are sent through relay stations, the identity of the broadcaster does not necessarily tell you where the signal is coming from. For example, Radio Moscow is retransmitted from a relay station in Cuba, to provide a strong signal into North, Central, and South America.
Most shortwave bands are referred to by their approximate wavelength. For example, the 9400-9900 kHz band is referred to as the "31 meter band," because the wavelength is approximately 31 m.
The Website Short-Wave.info (linked below) can be used to identify shortwave stations broadcasting on specific frequencies at specific times, in a specified language.
Because many broadcasts are sent through relay stations, the identity of the broadcaster does not necessarily tell you where the signal is coming from. For example, Radio Moscow is retransmitted from a relay station in Cuba, to provide a strong signal into North, Central, and South America.
Most shortwave bands are referred to by their approximate wavelength. For example, the 9400-9900 kHz band is referred to as the "31 meter band," because the wavelength is approximately 31 m.
The Website Short-Wave.info (linked below) can be used to identify shortwave stations broadcasting on specific frequencies at specific times, in a specified language.